★★★★★
“My biggest worry was that the line would pull on the replica or snag on my vest. In real use, routing through the gear matters most.”
Common customer feedbackline routing
LOW STOCK
69% SOLD
Regular price
1.699,00 CZK
Regular price
Sale price
1.699,00 CZK
Unit price
per
Taxes included.
Shipping calculated at checkout.
Couldn't load pickup availability
EXPRESS SHIPPING
Order within -- : -- : -- to receive package between -- to --
Ordered
--
Processing
--
Delivery
--
Estimated delivery date via Packeta is calculated automatically.
FINALLY, A HOSE YOU'LL COMPLETELY FORGET ABOUT DURING THE GAME.
38.6% softer material than the best-selling premium hose on the market — and the only one that stays flexible even at −15°C.
Play a single game with it. If you notice it even once, we'll refund every penny. The risk is on us.
You know the feeling.
You raise your replica to aim — and the hose gently pulls it down. By a few millimeters. Just enough to miss the shot that mattered.
Or you're running between covers. Your body goes one way — and the stiff hose pulls the other. It fights you. With every sudden change of direction, it snags on your plate carrier, sling, or a branch, reminding you once again that it's even there.
And then winter comes. You switched to HPA exactly to beat the cold that kills gas guns. Except your hose didn't get the memo. At five degrees below zero, it turns hard as a wire. You have gloves, heavy gear — and on top of it all, you're fighting a hose that froze right when you need freedom of movement the most.
It's not your fault. It's physics — and the whole market accepted it.
WE DIDN'T.
WHY EVERY HOSE FORCES YOU TO CHOOSE BETWEEN TWO BAD OPTIONS
Every HPA hose has to withstand 110 PSI. In a standard braided hose, that pressure is held largely by the tube wall itself — which is why it has to be hard and thick. Stiffness isn't a defect; it's the price for holding pressure.
And that's exactly the trap the market set for you. You're forced to pick between two evils:
Soft, which fails. Or stiff, which ruins your game.
You always had to choose.META™ HANDLES PRESSURE DIFFERENTLY. AND THAT'S WHY IT CAN BE SOFT.
In the META™ hose, pressure is not held by the wall. It is held by the polyester braid — the braid is the pressure vessel. This frees up the wall, which we can then make from an ultra-soft PVC composite.
Hardness test result:
56.5 SHORE A
META™
VS
92 SHORE A
Top-selling premium hose
38.6% SOFTER MATERIAL
The braid holds the pressure. The soft wall gives flexibility. Soft and kink-resistant. At the same time.
WE DON'T SAY "MORE FLEXIBLE". WE SHOW NUMBERS.
We introduced our own metric: IGPF — bend radius under gaming pressure. We took hoses, pressurized them to 110 PSI (the exact pressure you experience in a shootout), and measured them. An empty hose bends easily. Under pressure, the truth reveals itself.
| MEASUREMENT (AT 110 PSI) | META™ X‑HOSE | Top-selling premium hose¹ | Standard braided hose | Unbranded e-shop hose |
|---|---|---|---|---|
| Bend radius | 35 mm | 69 mm | 85 mm | 95 mm |
| Force required for 90° bend | 198 g | 356 g | 470 g | 687 g |
| Material hardness (Shore A) | 56.5 | 92 | 96 | 98 |
| Bend radius at −15 °C | 41 mm | 96 mm | — | — |
| Force for bend at −15 °C | 261 g | 812 g | — | — |
¹ Anonymous comparison with the currently top-selling premium hose on the market and standard hose categories. We don't name competitors — numbers speak for us.
49% TIGHTER BEND
Where top premium competition bends at 69 mm, META™ handles 35 mm.
1.8× LOWER RESISTANCE
A premium hose requires 356 g of force to bend. META™ takes just 198 g. You feel the difference with every direction change.
AND IN FREEZING COLD?
While top competitor hose more than triples its resistance at −15 °C turning almost into a wire, META™ barely changes. It stays flexible down to −25 °C. You played HPA all winter to beat the cold. Finally, that applies to your hose too.
WHAT IT MEANS IN THE FIELD
CLEAN AIMING
Your replica stays exactly where you raise it. No pulling down. No shots stolen by hose tension.
SPRINTS & TRANSITIONS WITHOUT SNAGGING
The hose moves with your body, not against it. It won't catch on your plate carrier or sling — it glides over your gear.
FAST MOVEMENT
1.8× less resistance means you simply don't feel the hose during sharp direction changes. Your body moves, the hose follows.
LONG & COLD GAMES
After six hours in the field and a full day in freezing cold, it stays just as soft as the moment you plugged it in.
DETAILS THAT MATTER IN THE FIELD
SMOOTH OUTER BRAID
Engineered to glide over gear without snagging — yet resistant to abrasion, mud, and moisture.
COLD‑FLEX COMPOSITE
Freeze-resistant plasticizers keep the wall flexible where standard hoses stiffen. Flexible down to −25 °C.
LOW PROFILE, FULL FLOW
Slim on the outside, optimized inside. No FPS drop even when spamming 25+ rounds per second. Working pressure 250 PSI.
FOSTER SERIES Z FITTINGS (US)
Fits PolarStar, Wolverine, Redline, and other regulators with US output.
MADE IN CZECHIA (EU)
Crafted from premium materials. Every single unit pressure tested.
TECHNICAL SPECIFICATIONS
Material
ultra-soft PVC composite + pressure-bearing polyester braid
Wall Hardness
56.5 Shore A
Bend Radius (IGPF @ 110 PSI)
35 mm
Force for 90° Bend (@ 110 PSI)
198 g
Freeze Flexibility
down to −25 °C
Length
110 cm
Working Pressure
250 PSI
Fittings
Foster Series Z (US) · 360° swivel fitting on replica side
Compatibility
PolarStar, Wolverine, Redline, and other US regulators
Colors
speedsoft and muted milsim finishes
WHAT PLAYERS SAY
“I played the entire winter season around −8 °C and for the first time I didn't think about the hose during the game at all. Finally.”
“On my HPA pistol, the old hose kept pulling my sights down. This one doesn't. A problem I thought I had to live with just disappeared.”
“In CQB, you feel the difference instantly. Your body moves, the hose follows. No snagging on the plate carrier.”
“I expected marketing talk. I measured it at home. The numbers check out.”
"YOU’LL FORGET IT’S THERE" GUARANTEE
This is not a standard 14-day return policy. This is a bet we’re making.
Take META™, plug it in, and play a full game day with it — anytime within your first 60 days.
And if during that game you think about the hose even once — if it pulls your shot once, snags once, stiffens in the cold once, or reminds you in any way that it’s there — message us and we’ll refund every single penny.
NO QUESTIONS
NO CATCHES
NO PROOF REQUIRED
Only a few pieces left in stock.
YOU HAVE TWO CHOICES
OPTION 1
Tomorrow, you can fight your hose again as it ruins your shots, snags on your gear, and freezes in your hands.
OPTION 2
Or you can forget it’s even there — and focus purely on the game.
DECIDE NOW.
FREQUENTLY ASKED QUESTIONS
DOES META™ FIT MY REGULATOR?
Yes, as long as you have a US output (Foster). It fits PolarStar, Wolverine, Redline, and other standard US regulators. Fittings are standard Foster Series Z.
DOES IT WORK IN WINTER AND WET CONDITIONS?
Yes — that's exactly what it was built for. The cold-flex composite keeps the hose flexible down to −25 °C, and the braid handles moisture and mud effortlessly. Winter is the main reason you want this hose.
IS IT QUICK TO INSTALL?
Seconds. Quick-disconnect fitting, no tools required. Plug in and play.
WILL IT REDUCE FLOW OR FPS?
No. The optimized inner diameter maintains full flow — no FPS drop even during rapid spam. Working pressure 250 PSI.
WHAT COLORS IS IT AVAILABLE IN?
In vibrant speedsoft colors as well as muted milsim variants. Choose according to how you play.
WHAT IF I DON'T LIKE IT?
Read our guarantee above. Play one game with it. If you think about it even once, you get every penny back.
X CUSTOM / META LINE PRO
What customers most often say about HPA lines
The most common concerns and experiences from players choosing an HPA line for real gameplay.
★★★★★
“Every line looks good on a table. You feel the difference when it is under pressure and you start moving with the gun.”
Common customer feedbackunder-pressure test
★★★★★
“I didn’t want a stiff line fighting me when switching shoulders. I wanted something that disappears into the movement.”
Common customer feedbackshoulder transition